oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 821-if70.0m-14a 70.0 mhz if saw filter 14.0mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 821-if70.0m-14a january 2011 rev a 70.0 mhz if saw filter 14.0mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i ground j input e output test fixture & values input l1=180nh output l2=100nh source/load impedance 50 ?
oscilent part number 821-if70.0m-14a january 2011 rev a 70.0 mhz if saw filter 14.0mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 69.90 70.00 70.10 insertion loss at fo db - 21.0 24.0 amplitude ripple variation at fo 7.0 mhz db p-p - 0.55 1.0 group delay variation at fo 7.0 mhz nsec - 50 100 absolute delay at fo sec - 2.34 - temperature coefficient ppm/c - -72 - bandwidth at ?1.0 db mhz - 14.82 - bandwidth at ?3.0 db mhz 14.90 15.15 - bandwidth at ?40.0 db mhz - 16.48 16.80 lower sidelobe db 50 55 - upper sidelobe db 50 55 -
oscilent part number 821-if70.0m-14a january 2011 rev a 70.0 mhz if saw filter 14.0mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?3.0 db bandwidth at ?40.0 db bandwidth at ?1.0 db wide band
oscilent part number 821-if70.0m-14a january 2011 rev a 70.0 mhz if saw filter 14.0mhz bandwidth product specification p. 4 www.oscilent.com ripple variation group delay variation smith chart
oscilent part number 821-if70.0m-14a january 2011 rev a 70.0 mhz if saw filter 14.0mhz bandwidth product specification p. 5 www.oscilent.com vswr
|